Original source: Exocet
This video from Exocet covered a lot of ground. Streamed.News selected 3 key moments and summarises them here. Everything below links directly to the timestamp in the original video.
How can a board's design change the physics of sailing? A longer board can create more power, letting you use smaller, lighter gear without losing performance.
Exocet Breeze V2's Length Allows for Smaller Sails Without Sacrificing Power
The Exocet Breeze V2 windsurfing board uses its extended length to generate its own power, a characteristic of longboards. This design allows riders to use a sail that is a half-size smaller than what would be required on a comparable shortboard, yet still achieve the same amount of power and momentum in light wind conditions. The recommended starting point for the mast base is the middle of the track, a more forward position than on typical shortboards.
This design principle makes wave sailing less physically demanding and simplifies the setup process. By moving the mast base from its central position, riders can fine-tune the board's balance for different sail sizes and personal preferences, avoiding the sluggish feel that comes from placing the mast too far back.
"As it is long, it generates by itself some power. So if I would use on a 110 litre shortboard 5.5 for example, with the Breeze you can go half-size down easily and still get as much power."
New Breeze V2 Board Offers Wide Range of Footstrap and Fin Adjustments
The Exocet Breeze V2 board integrates a high degree of customisation to suit different sailing styles and conditions. It features built-in shock absorbers and a standard wave-sailing footstrap setup, with an alternative two-strap option for flat-water sailing. The footstrap span has a wide adjustment range, extending up to 48 centimeters to accommodate various stances.
These adjustments are interconnected, as the board’s fin can also be moved forward or backward. Shifting the fin's position alters the board's center of gravity, which in turn may require a corresponding adjustment to the mast base to maintain optimal balance and performance.
Step Tail Design on Breeze V2 Aims for Smooth Planing and Stability
A key feature of the Exocet Breeze V2 is its step tail, a design element intended to make it easier for the board to lift onto the water's surface, a state known as planing. The step tail creates a stable platform that keeps the water flow flat, ensuring a smooth transition to speed without the tail kicking up unexpectedly, even on a long board.
This design is complemented by versatile fin configurations. Riders can use a three-fin setup or switch to a single, larger fin with an adapter, allowing them to significantly adjust the board's power and control by moving the fin forward for more power or back to depower.
"The step tail is a super nice platform to keep the flow of water very flat. And once you get planing, you will hardly feel you start to get planing... the board will never kick on the tail."
Summarised from Exocet · 7:09. All credit belongs to the original creators. Exocet Windsurfing summarises publicly available video content.
