— yt-channel —
A simple visual inspection from the boom's clue end can diagnose incorrect batten tension. When viewed along this axis, the sail battens should form a continuous straight line descending towards the boom, with only the top batten curving slightly upwards. If any single batten protrudes noticeably fr
A windsurfing sail creates forward momentum through lift, similar to an aircraft's wing, not by simply catching the wind in a bag. Smooth airflow across both sides of the sail—a higher pressure inside and lower pressure outside—is what generates controllable power. A mast with the correct rigidity i
Outhaul tension at the clew should be set differently depending on sail type to maximize performance. For freestyle or wave sails, such as the Point-7 Slash or Spy, the outhaul should be pulled tight against the cleat with no gap. This method prevents any unwanted movement at the back of the sail, w
To properly execute the mast-grab sail flip, Tom Brendt explains that the front hand must slide as close to the mast as possible before the back hand releases the boom. This action allows the sail to swing open completely into a neutral position. The back hand then drops in front of the stomach to i
The third and most critical phase of a carving step jibe is the "transition," where the rider simultaneously switches feet and flips the sail. This requires a "ninja quick" hop to swap foot positions, with the new back foot’s heel landing on the windward rail to maintain the board's carve. As the sa